Șurub și țeavă

Material: Alloy steel
Application: heat and nitriding treatment
Model: Screw and Barrel (single/twin)
Suitable plastic material: PP, PE, ABS, PS etc.
Effective length: 12000mm
Bimetallic type: centrifugal casting

Port: Shanghai, China
Termeni comerciali internaționali (Incoterms): FOB, CFR, CIF, EXW
Termeni de plată: LC, T/T
Certificare: CE, ISO, UL, QS, GMP
Garanție: 1 an
Timp mediu de livrare: Timp de livrare în sezonul de vârf: 3-6 luni, Timp de livrare în afara sezonului: 1-3 luni

screw and barrel

Single screw and barrel

Material
Alloy –steel of High-quality
1) 38 CrMoA LA (JIS SACM645)
2) 42 CrMo(JIS SCM440)
3) 9 Cr18MoV
4) CW6Mo5Cr4V2

Heat-treatment
Nitriding treatment
Electroplated hard-chrome finish
Spray coating Bimetallic-alloy

Twin screw and barrel

Material
Alloy –steel of High-quality
1) 38 CrMoA LA (JIS SACM645)
2) 9 Cr18MoV

Heat-treatment
Nitriding treatment
Spray coating Bimetallic-alloy

Technical data
Depth of nitration layer: 0.50 -0.80mm
Hardness of nitration: 900-1000HV
Fragility of nitration:Less than grade 1
Roughness of the surface:Ra0.4
Linearity of the screw: 0.015mm
The surface hard chromium plating hardness after
Nitrogenation: ≥ 950Hv
Chrome-plating layer thickness: 0.025 -0.085mm

screw and barrel Technical details

● Base material : 45# 40Cr
● Bimetallic type: Centrifugal casting
● Application: Injection molding machine & Extruder
● Products range: Inner diameter ?12- ?300mm
● Effective Length: 12000mm
● Nitrided layer thickness: 0.50-0.80mm
● Hardness: HV960
● Straightness: 0.015mm/m
● Chrome coated layer: 0.02-0.085mm
● Suitable plastic material: PP, PE, ABS, AS, PS etc.
● Material: ACM645, SCM440 , 38CrMoAIA

screw and barrel Application

All kinds of SJZ and SJP extruders that our company designs especially for producing the PVC pipe and profile, our extruders can promise a good plasticization, high capacity and advanced electric control, and the electrical cabinet can be chosen by customer according to their own demands.leo.

For pipe Extrusion

Extruder Model	Speed (RPM)	Motor (KW)	Capacity (kg/h)	Center Height (mm)	Weight (kg)	Dimension (M)
SJZ45/100	45	15/18.5	110	1050	3000	3.31.22.1
SJZ50/105	45	18.5/22	125	1050	3000	3.61.12.1
SJZ55/110	45	22/30	180	1050	3500	3.61.12.1
SJZ65/132	45	37	380	1050	4000	4.21.52.4
SJZ80/156	34.7	55	500	1050	5500	4.71.52.4
SJZ80/173	37.6	75	680	1050	6000	3.91.62.5
SJZ92/188	34.7	110	800	1100	8000	61.62.5
SJZ110/220	34.7	160	1400	1100	9000	6.51.62.5

For Profile Extrusion

Extruder Model	Speed (RPM)	Motor (KW)	Capacity (kg/h)	Center Height (mm)	Weight (kg)	Dimension (M)
SJZ45/100	34.7	15	60-80	1050	2500	3.31.22.1
SJZ51/105	34.7	18.5	80-120	1050	3000	3.61.12.1
SJZ55/110	34.7	22	100-150	1050	3500	3.61.12.1
SJZ65/132	34.7	37/30	180-250	1050	4000	4.21.52.4
SJZ80/156	34.7	55	300-400	1050	5500	4.71.52.4
SJZ80/173	34.7	75	500-600	1050	6000	3.91.62.5
SJZ92/188	34.7	110	600-800	1100	8000	61.62.5
SJZ110/220	34.7	160	1200-1400	1100	10000	6.51.62.5

For production of PVC pipe

Extrud Model	Speed (RPM)	Motor (KW)	L/D Ratio	Capacity (kg/h)	Center Height (mm)	Weight (kg)
SJP75/28	45	45	28:01:00	220-350	1050	4100
SJP93/28/31	45	75	28:1/31:1	380-460	1050	4700
SJP110/31	45	110	31:01:00	680	1050	6500
SJP120/31/26	45	132	31:01:00	850	1050	7500
SJP135/31	45	160	31:01:00	1100	1050	8400

For production of Profile

Extrud Model	Speed (RPM)	Motor (KW)	L/D Ratio	Capacity (kg/h)	Center Height (mm)	Weight (kg)
SJP75/28	36	37	28:01:00	240	1050	4100
SJP93/28/31	36	55	28:1/31:1	350	1050	4700
SJP110/28	35.8	75	28:01:00	460	1050	6500
SJP120/26	34.3	110	26:01:00	550	1050	7500
SJP130/26	34.3	132	26:01:00	680	1050	8400

For production of PVC hard material and various cables palletizing

Extruder Model	Speed (RPM)	Motor (KW)	Capacity (kg/h)	Total Power (KW)	Weight (kg)
JWT67/134	5-58	45	500-700	110	1800

Single Screw Extruder for HDPE Pipe

It is widely used in the area of water supply and gas supply. Feeding section is grooved structure with temperature controller, and easy to get high capacity and stable extrusion. With advanced BM screw structure, it is able to divide the HDPE material from solid to liquid.

High Efficient 38 Series

Extruder Model	Screw Dia.(mm)	L/D Ratio	Motor (KW)	Capacity (kg/h)	Center Height (mm)
JWS60/40	60	40	90/110	360-450	1000
JWS75/38	75	38	132/160	400-650	1000
JWS90/38	90	38	250/280	800-1000	1150
JWS120/38	120	38	315/355	900-1200	1300

Classic 33 Series

Extruder Model	Screw Dia.(mm)	L/D Ratio	Motor (KW)	Capacity (kg/h)	Center Height (mm)
JWS45/33	45	33	18.5/22/30	60-100	1000
JWS65/33	65	33	45/75/90	100-250	1000
JWS75/33	75	33	110/132	250-350	1000
JWS90/33	90	33	160/185	450-550	1150
JWS120/33	120	33	280/315	700-900	1300
JWS150/33	150	33	355/400	1000-1300	1300

Caracteristici:
By using the new type barrier screw design, this extruder has a high extrusion capacity in high RPM with the low energy consumption, and this extruder can gain a good mixing effect in the low temperature, and this extruder can control the material shearing to get the ideal and even melt temperature, so that the ripple mark in the inner wall of the big diameter pipe can be avoided.

Single Screw Extruder for HDPE Pipe

This model of equipment mainly used to extrude profile, the structure and form of screws and barrels vary a lot, and the screws and barrels are processed precisily which can gurantee a good plasticization, high capacity and can meet different customer’s needs, the electrical controling parts are equiped in high class which made it safe to operate.Suitable for PVC\PC\ABS Profile.

Extruder Model	Screw Dia.(mm)	L/D Ratio	Motor (KW)	Capacity (kg/h)	Center Height (mm)	Polymer Processing
JWS45	45	25/28	11/15/18.5	10-100	1000	PC/ABS/PC
JWS65	65	25/28	18.5/22/30	10-100	1000	PVC/PC/ABS
JWS75	75	25/28	37	10-100	1000	PVC/PC/ABS
JWS80	80	28/30	37	10-90	1000	PP/ABS/PC
JWS90	28	28/30	45	10-90	1000	PP/ABS/PS
JWS120	120	28/30	75	10-90	1000	PC/ABS

PVC PVG Conveyer Belt Cover Extruder

In order to the customer’s technics requirement for the conveter belt,Jwell successfully develops serials conveyer belt cover extruder and relation mould,it can be molding for the pvc belt’s surface,adjust the thickness of the cover,leave out the others.This extruder install on the left and right,have good plastic,high output,low power and the high design for the produce method.

Extruder Model	Screw Dia.(mm)	L/D Ratio	Speed (RPM)	Capacity (kg/h)	Center Height (mm)	Weight (T)	Dimension (MM)
JWS90/30	90	30	10-45	150	1200	4	365025202100
JWS120/28	120	28	10-45	300	1200	5	450025202200
JWS150/28	150	28	10-45	400	1200	6.5	550025202300

PS PC Electronic Narrow Band Extruder

PS/PC narrow band is a king of packaging products, mainly for the IC, resistance, inductance, capacitance, connectors, fuses,switches and other electronice components of the packaging. This product is currently PS and PC for three layers of composite extrusion.

Extruder Model	Screw Dia.(mm)	L/D Ratio	Motor (KW)	Speed (RPM)	Capacity (kg/h)	Center Height (mm)
JWS45	45	28	11	10-75	10--75	1000
JWS35	35	28	7.5	10-75	10--75	1000

All kinds of co-extrusion machine

n order to meet the actual needs of various customers, the company can provide all kinds of uses co-extrusion machine, used for profile pre and after Co-extrusion, or wood plastic products surface coating, mark line for pipes according to customers[ special requirements, special design custom-made.

For Pipe Mark Line

Extruder Model	Screw Dia.(mm)	L/D Ratio	Speed (RPM)	Motor (KW)	Barrel Heating(KW)	Capacity (kg/h)	Center Height (mm)
JWS25/25A	25	25	1--15	0.75	3	3	1100±50
JWS25/25B	25	25	1-50	1.5	3	8	1100±50
JWS30/28	30	28	1-50	3	3.6	10	1100±100

For Profile Co-Extrusion

Extruder Model	Screw Dia.(mm)	L/D Ratio	Speed (RPM)	Motor (KW)	Barrel Heating(KW)	Capacity (kg/h)	Center Height (mm)
JWS30/25	30	25	1-60	3--4	3	8--10	800-1200 adjustable
JWS35/25	35	25	1-50	4--5.5	6.9	10--12	800-1200 adjustable
JWS45/25	45	25	1-58	5.5--7.5	9	20--25	1100±100
JWS50/25	50	25/28	1-58	11--15	10	25--35	1100±100
JWS65/25	65	25/28	1-80	15--22	12	35--40	1100±100
SJZ35/75	35/75	22.97	1-39	11	9	35--40	Adjustable

Spinning Extruder

JWM series extruders are used for melt spining of PET, PA6, PA66, PP chips.
The LTM designed in screw, and the melt quality is better. The precision of screw and barrel is higher after professional proce ssing. And equiped high precision bevel-teeth gear box, operating stability, lowest noise.

assemble strong push bearing. in ord to guarantee bearing huge axle power. and be able to select to equip imported high speed bearing and seal parts.

Extruder Model	Speed (RPM)	L/D Ratio	Capacity (kg/h)	Speed (RPM)	Pressure Mpa	Transmission Power kw	Heating Power kw	Heating Zone	Heating Voltage	Center Height mm	Weight (T)
JWM45/25	45	25	38	20-90	15--25	7.5	8	3	220	340	1
JWM65/25	65	25	78	20-90	15--25	18.5	16	5	220	340	1.3
JWM80/25	80	25	115	20-80	15--25	37	27	5	220	510	1.8
JWM90/25	90	25	196	20-80	15--25	45	32	5	220	510	2
JWM105/25	105	25	295	20-70	15--25	55	45	5	220	610	3
JWM120/25	120	25	390	20-60	15--25	75	54	6	220	660	3.5
JWM135/25	135	25	535	20-60	15--25	90	63	6	220	660	4.2
JWM150/25	150	25	652	20-60	15--25	110	76.5	6	380	710	5
JWM160/25	160	25	705	20-60	15--25	132	85.5	6	380	710	6
JWM170/25	170	25	850	20-60	15--25	160	103.5	6	380	720	8
JWM180/25	180	25	972	20-60	15--25	185	110	7	380	800	10
JWM200/25	190	25	1050	20-60	15--25	200	150	7	380	1000	12

PP Non-woven Fabrics Extruder

JWM series Non-woven fabrics Extruder are specialized in PP Non-woven fabrics production. Normally it uses two extruders in series. the screw L/D of the main extruder is 30:1, the ancillary extruder mainly used for machining leftover material and flot- sam drapery which can be recycled on the line, the L/D is mainly 15:1. various kinds of the extruder model for different width Non-woven fabrics products.

Extruder Model	L/D Ratio	Speed (RPM)	Transmission Power kw	Heating Power kw	Heating Zone	Heating Voltage	Center Height mm	Weight (T)	Nota
JWM135/30	30	20--60	75	80	6	220	660	4.5	suitable for 1.6m
JWM105/15	15	20--80	15/18.5	18	4	220	660	2	suitable for 1.6m
JWM150/30	30	20--60	110	90	7	380	710	5.5	suitable for 2.4m
JWM105/15	15	20--80	15/18.5	18	4	220	710	2	suitable for 2.4m
JWM160/30	30	20--60	132	100	7	380	710	6.5	suitable for 2.4m
JWM105/15	15	20--80	22	18	4	220	710	2	suitable for 2.4m
JWM170/30	30	20--60	132	110	7	380	710	8.5	suitable for 3.2m
JWM105/15	15	20--80	22	18	4	220	710	2	suitable for 3.2m
JWM180/30	30	20--50	160	120	7	380	720	10.5	suitable for 3.2m
JWM120/15	15	20--80	30	24	4	220	720	2.5	suitable for 3.2m

JWS45/25 single Screw Extruder for Ultra High Molecular Weight Polyethylene (UHMW-PE)

The extruder has our patented design for screw and barrel, which can be used to process more than 1.5 million molecular of the powder material. By overcoming poor flow ability, Mechanical Properties decreasing due to easy degaradation, etc. The extruder can have stable output and reliable plasticization during production. Also the extruder equips high efficient and energy saving driving motor, infrared energy-saving heaters, reducing energy comsumption.
The extruder has a compact structure, beautiful appearance, small space, easy operation etc, can be used to produce a variety of small plates, profiles, rods production.

Model No.	JWS45/25
Screw RPM	3–25
Capacitatea (kg/h)	3–10
Motor Power(kw)	5.5
Heating Power( kw)	9.4

screw and barrel Machining Process

ÎNTREBĂRI FRECVENTE

Capacitatea comercială

Termeni comerciali internaționali (Incoterms): FOB, CFR, CIF, EXW
Termeni de plată: LC, T/T
Timp mediu de livrare: Timp de livrare în sezonul de vârf: 3-6 luni, Timp de livrare în afara sezonului: 1-3 luni
Număr de personal de tranzacționare externă: > 50 de persoane

Este Jwell Machinery un producător?

Da, deținem 5 baze de producție și centre de vânzări în Shanghai, Suzhou, Changzhou, Zhou Shan, Dongguan China.
Jwell a făcut primul șurub și butoi chinezesc în 1978 în numele de marcă Jinhailuo.După mai mult de 40 de ani de dezvoltare,
JWELL este unul dintre cei mai mari furnizori de mașini de extrudare din China, cu 300 de ingineri de proiectare și testare, 3000 de angajați.
Jwell a devenit principalul furnizor de linii de extrudare și parteneri de afaceri de încredere. Bine ați venit la noi.

Cum vă asigurați calitatea utilajelor și a serviciilor?

Mașinile noastre luând standardele europene și urmați tipul de Germania de afaceri, am cooperarea cu
mărci internaționale renumite Siemens Schneider Flender Omron ABB WEG Falk Fuji etc. Compania noastră continuu
importă peste 1000 de echipamente internaționale de prelucrare de înaltă precizie de primă clasă, cum ar fi centre de prelucrare multietajate, strunguri CNC și mașini de frezat CNC din Coreea, Japonia etc. Toate procesele noastre aderă strict la certificarea CE,
IS09001 și 2008 sistem de management al calității. Și avem 12 luni timp de garanție de calitate. Noi testarea
performanțele utilajului înainte de fiecare livrare. Inginerii de service Jwell vor fi întotdeauna aici pentru orice aveți nevoie.

Cât de lungă este data livrării?

De obicei, este nevoie de aproximativ 1 - 4 luni, în funcție de diferite utilaje, de la primirea plății în avans a comenzii.

Cum pot comanda și efectua plăți?

Odată clarificate cerințele dvs. și determinată linia de extrudare este ideal pentru tine. Vă vom trimite soluții tehnice și
Factura Proforma pentru tine. Puteți plăti prin transfer bancar TT, LC după cum doriți.

Care este cantitatea minimă de comandă?

Unu. Oferim atât linii de extrudare personalizate, cât și soluții tehnice. Bine ați venit să ne contactați pentru informații tehnice
inovații sau îmbunătățiri pentru viitorul dvs. plan de achiziții.

Care este capacitatea dumneavoastră de producție?

Producem mai mult de 2000 de linii avansate de extrudare în fiecare an la nivel mondial.

Cum rămâne cu transportul maritim?

Putem trimite piese de schimb mici prin expres aerian pentru probleme urgente. Și linia de producție completă prin mare
pentru a reduce costurile. Puteți utiliza fie propriul agent de expediere desemnat, fie expeditorul nostru cooperant. Cel mai apropiat
portul este China Shanghai, Ningbo port, care este convenabil pentru transportul maritim..

Există vreun serviciu înainte și după vânzare?

Da, ne susținem partenerii de afaceri prin servicii înainte și după vânzare. Jwell are mai mult de 300 de teste tehnice
ingineri care călătoresc în întreaga lume. Orice caz va fi rezolvat cu soluții prompte. Oferim instruire, testare,
servicii de operare și întreținere pentru o viață întreagă.

Certificatele

Certificat de: SGS

echipamente de extrudare în flux descendent

2015-07-23 ~ 2020-07-23

Certificat de: SGS

echipamente de extrudare în flux descendent

2015-07-23 ~ 2020-07-23

Certificat de: SGS

echipamente de extrudare în flux descendent

2015-07-23 ~ 2020-07-23

Certificat de: SGS

echipamente de extrudare în flux descendent

2015-07-23 ~ 2020-07-23

Certificat de:Altele

Proiectare, dezvoltare, producție și vânzare de management al drepturilor de proprietate intelectuală pentru mașini din plastic

2016-06-14 ~ 2019-06-13

Certificat de:Altele

Proiectare, dezvoltare, fabricare și vânzare de țevi din plastic și linie de producție de extrudare foaie

2018-11-20 ~ 2021-11-19

Certificat de: Quality Austria Training, Certification and Evaluation Ltd

Linie de extrudare a plasticului

2010-01-29 ~

Aisa

Africa

America de Nord

Europa

America de Sud

Oceania

Antarctica

Șurub și țeavă

screw and barrel

screw and barrel Technical details