Screwrrel
- Material: Zlitina jekla
- Uporaba: toplotna in nitridna obdelava
- Model: Vijačni in cilindrični (enostavni/dvojni)
- Ustrezen plastični material: PP, PE, ABS, PS itd.
- Učinkovita dolžina: 12000 mm
- Bimetalni tip: centrifugalno litje
- Pristanišče: Šanghaj, Kitajska
- Mednarodni trgovinski pogoji (Incoterms): FOB, CFR, CIF, EXW.
- Plačilni pogoji: LC, T/T
- Certificiranje: CE, ISO, UL, QS, GMP
- Garancija: 1 leto
- Povprečni čas izvedbe: Čas priprave v vrhuncu sezone: 3-6 mesecev, izven sezone: 1-3 mesece.
screw and barrel
Single screw and barrel
Material
Alloy –steel of High-quality
1) 38 CrMoA LA (JIS SACM645)
2) 42 CrMo(JIS SCM440)
3) 9 Cr18MoV
4) CW6Mo5Cr4V2
Heat-treatment
Nitriding treatment
Electroplated hard-chrome finish
Spray coating Bimetallic-alloy
Twin screw and barrel
Material
Alloy –steel of High-quality
1) 38 CrMoA LA (JIS SACM645)
2) 9 Cr18MoV
Heat-treatment
Nitriding treatment
Spray coating Bimetallic-alloy
Technical data
Depth of nitration layer: 0.50 -0.80mm
Hardness of nitration: 900-1000HV
Fragility of nitration:Less than grade 1
Roughness of the surface:Ra0.4
Linearity of the screw: 0.015mm
The surface hard chromium plating hardness after
Nitrogenation: ≥ 950Hv
Chrome-plating layer thickness: 0.025 -0.085mm
screw and barrel Technical details
● Base material : 45# 40Cr
● Bimetallic type: Centrifugal casting
● Application: Injection molding machine & Extruder
● Products range: Inner diameter ?12- ?300mm
● Effective Length: 12000mm
● Nitrided layer thickness: 0.50-0.80mm
● Hardness: HV960
● Straightness: 0.015mm/m
● Chrome coated layer: 0.02-0.085mm
● Suitable plastic material: PP, PE, ABS, AS, PS etc.
● Material: ACM645, SCM440 , 38CrMoAIA
screw and barrel Application
All kinds of SJZ and SJP extruders that our company designs especially for producing the PVC pipe and profile, our extruders can promise a good plasticization, high capacity and advanced electric control, and the electrical cabinet can be chosen by customer according to their own demands.leo.
For pipe Extrusion
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Weight (kg) | Dimension (M) |
|---|---|---|---|---|---|---|
| SJZ45/100 | 45 | 15/18.5 | 110 | 1050 | 3000 | 3.3*1.2*2.1 |
| SJZ50/105 | 45 | 18.5/22 | 125 | 1050 | 3000 | 3.6*1.1*2.1 |
| SJZ55/110 | 45 | 22/30 | 180 | 1050 | 3500 | 3.6*1.1*2.1 |
| SJZ65/132 | 45 | 37 | 380 | 1050 | 4000 | 4.2*1.5*2.4 |
| SJZ80/156 | 34.7 | 55 | 500 | 1050 | 5500 | 4.7*1.5*2.4 |
| SJZ80/173 | 37.6 | 75 | 680 | 1050 | 6000 | 3.9*1.6*2.5 |
| SJZ92/188 | 34.7 | 110 | 800 | 1100 | 8000 | 6*1.6*2.5 |
| SJZ110/220 | 34.7 | 160 | 1400 | 1100 | 9000 | 6.5*1.6*2.5 |
For Profile Extrusion
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Weight (kg) | Dimension (M) |
|---|---|---|---|---|---|---|
| SJZ45/100 | 34.7 | 15 | 60-80 | 1050 | 2500 | 3.3*1.2*2.1 |
| SJZ51/105 | 34.7 | 18.5 | 80-120 | 1050 | 3000 | 3.6*1.1*2.1 |
| SJZ55/110 | 34.7 | 22 | 100-150 | 1050 | 3500 | 3.6*1.1*2.1 |
| SJZ65/132 | 34.7 | 37/30 | 180-250 | 1050 | 4000 | 4.2*1.5*2.4 |
| SJZ80/156 | 34.7 | 55 | 300-400 | 1050 | 5500 | 4.7*1.5*2.4 |
| SJZ80/173 | 34.7 | 75 | 500-600 | 1050 | 6000 | 3.9*1.6*2.5 |
| SJZ92/188 | 34.7 | 110 | 600-800 | 1100 | 8000 | 6*1.6*2.5 |
| SJZ110/220 | 34.7 | 160 | 1200-1400 | 1100 | 10000 | 6.5*1.6*2.5 |
For production of PVC pipe
| Extrud Model | Speed (RPM) | Motor (KW) | L/D Ratio | Capacity (kg/h) | Center Height (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| SJP75/28 | 45 | 45 | 28:01:00 | 220-350 | 1050 | 4100 |
| SJP93/28/31 | 45 | 75 | 28:1/31:1 | 380-460 | 1050 | 4700 |
| SJP110/31 | 45 | 110 | 31:01:00 | 680 | 1050 | 6500 |
| SJP120/31/26 | 45 | 132 | 31:01:00 | 850 | 1050 | 7500 |
| SJP135/31 | 45 | 160 | 31:01:00 | 1100 | 1050 | 8400 |
For production of Profile
| Extrud Model | Speed (RPM) | Motor (KW) | L/D Ratio | Capacity (kg/h) | Center Height (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| SJP75/28 | 36 | 37 | 28:01:00 | 240 | 1050 | 4100 |
| SJP93/28/31 | 36 | 55 | 28:1/31:1 | 350 | 1050 | 4700 |
| SJP110/28 | 35.8 | 75 | 28:01:00 | 460 | 1050 | 6500 |
| SJP120/26 | 34.3 | 110 | 26:01:00 | 550 | 1050 | 7500 |
| SJP130/26 | 34.3 | 132 | 26:01:00 | 680 | 1050 | 8400 |
For production of PVC hard material and various cables palletizing
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Total Power (KW) | Weight (kg) |
|---|---|---|---|---|---|
| JWT67/134 | 5-58 | 45 | 500-700 | 110 | 1800 |
Single Screw Extruder for HDPE Pipe
It is widely used in the area of water supply and gas supply. Feeding section is grooved structure with temperature controller, and easy to get high capacity and stable extrusion. With advanced BM screw structure, it is able to divide the HDPE material from solid to liquid.
High Efficient 38 Series
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|
| JWS60/40 | 60 | 40 | 90/110 | 360-450 | 1000 |
| JWS75/38 | 75 | 38 | 132/160 | 400-650 | 1000 |
| JWS90/38 | 90 | 38 | 250/280 | 800-1000 | 1150 |
| JWS120/38 | 120 | 38 | 315/355 | 900-1200 | 1300 |
Classic 33 Series
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|
| JWS45/33 | 45 | 33 | 18.5/22/30 | 60-100 | 1000 |
| JWS65/33 | 65 | 33 | 45/75/90 | 100-250 | 1000 |
| JWS75/33 | 75 | 33 | 110/132 | 250-350 | 1000 |
| JWS90/33 | 90 | 33 | 160/185 | 450-550 | 1150 |
| JWS120/33 | 120 | 33 | 280/315 | 700-900 | 1300 |
| JWS150/33 | 150 | 33 | 355/400 | 1000-1300 | 1300 |
Značilnosti:
By using the new type barrier screw design, this extruder has a high extrusion capacity in high RPM with the low energy consumption, and this extruder can gain a good mixing effect in the low temperature, and this extruder can control the material shearing to get the ideal and even melt temperature, so that the ripple mark in the inner wall of the big diameter pipe can be avoided.
Single Screw Extruder for HDPE Pipe
This model of equipment mainly used to extrude profile, the structure and form of screws and barrels vary a lot, and the screws and barrels are processed precisily which can gurantee a good plasticization, high capacity and can meet different customer’s needs, the electrical controling parts are equiped in high class which made it safe to operate.Suitable for PVC\PC\ABS Profile.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Polymer Processing |
|---|---|---|---|---|---|---|
| JWS45 | 45 | 25/28 | 11/15/18.5 | 10-100 | 1000 | PC/ABS/PC |
| JWS65 | 65 | 25/28 | 18.5/22/30 | 10-100 | 1000 | PVC/PC/ABS |
| JWS75 | 75 | 25/28 | 37 | 10-100 | 1000 | PVC/PC/ABS |
| JWS80 | 80 | 28/30 | 37 | 10-90 | 1000 | PP/ABS/PC |
| JWS90 | 28 | 28/30 | 45 | 10-90 | 1000 | PP/ABS/PS |
| JWS120 | 120 | 28/30 | 75 | 10-90 | 1000 | PC/ABS |
PVC PVG Conveyer Belt Cover Extruder
In order to the customer’s technics requirement for the conveter belt,Jwell successfully develops serials conveyer belt cover extruder and relation mould,it can be molding for the pvc belt’s surface,adjust the thickness of the cover,leave out the others.This extruder install on the left and right,have good plastic,high output,low power and the high design for the produce method.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Capacity (kg/h) | Center Height (mm) | Weight (T) | Dimension (MM) |
|---|---|---|---|---|---|---|---|
| JWS90/30 | 90 | 30 | 10-45 | 150 | 1200 | 4 | 3650*2520*2100 |
| JWS120/28 | 120 | 28 | 10-45 | 300 | 1200 | 5 | 4500*2520*2200 |
| JWS150/28 | 150 | 28 | 10-45 | 400 | 1200 | 6.5 | 5500*2520*2300 |
PS PC Electronic Narrow Band Extruder
PS/PC narrow band is a king of packaging products, mainly for the IC, resistance, inductance, capacitance, connectors, fuses,switches and other electronice components of the packaging. This product is currently PS and PC for three layers of composite extrusion.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Speed (RPM) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|
| JWS45 | 45 | 28 | 11 | 10-75 | 10--75 | 1000 |
| JWS35 | 35 | 28 | 7.5 | 10-75 | 10--75 | 1000 |
All kinds of co-extrusion machine
n order to meet the actual needs of various customers, the company can provide all kinds of uses co-extrusion machine, used for profile pre and after Co-extrusion, or wood plastic products surface coating, mark line for pipes according to customers[ special requirements, special design custom-made.
For Pipe Mark Line
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Motor (KW) | Barrel Heating(KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|---|
| JWS25/25A | 25 | 25 | 1--15 | 0.75 | 3 | 3 | 1100±50 |
| JWS25/25B | 25 | 25 | 1-50 | 1.5 | 3 | 8 | 1100±50 |
| JWS30/28 | 30 | 28 | 1-50 | 3 | 3.6 | 10 | 1100±100 |
For Profile Co-Extrusion
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Motor (KW) | Barrel Heating(KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|---|
| JWS30/25 | 30 | 25 | 1-60 | 3--4 | 3 | 8--10 | 800-1200 adjustable |
| JWS35/25 | 35 | 25 | 1-50 | 4--5.5 | 6.9 | 10--12 | 800-1200 adjustable |
| JWS45/25 | 45 | 25 | 1-58 | 5.5--7.5 | 9 | 20--25 | 1100±100 |
| JWS50/25 | 50 | 25/28 | 1-58 | 11--15 | 10 | 25--35 | 1100±100 |
| JWS65/25 | 65 | 25/28 | 1-80 | 15--22 | 12 | 35--40 | 1100±100 |
| SJZ35/75 | 35/75 | 22.97 | 1-39 | 11 | 9 | 35--40 | Adjustable |
Spinning Extruder
JWM series extruders are used for melt spining of PET, PA6, PA66, PP chips.
The LTM designed in screw, and the melt quality is better. The precision of screw and barrel is higher after professional proce ssing. And equiped high precision bevel-teeth gear box, operating stability, lowest noise.
assemble strong push bearing. in ord to guarantee bearing huge axle power. and be able to select to equip imported high speed bearing and seal parts.
| Extruder Model | Speed (RPM) | L/D Ratio | Capacity (kg/h) | Speed (RPM) | Pressure Mpa | Transmission Power kw | Heating Power kw | Heating Zone | Heating Voltage | Center Height mm | Weight (T) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JWM45/25 | 45 | 25 | 38 | 20-90 | 15--25 | 7.5 | 8 | 3 | 220 | 340 | 1 |
| JWM65/25 | 65 | 25 | 78 | 20-90 | 15--25 | 18.5 | 16 | 5 | 220 | 340 | 1.3 |
| JWM80/25 | 80 | 25 | 115 | 20-80 | 15--25 | 37 | 27 | 5 | 220 | 510 | 1.8 |
| JWM90/25 | 90 | 25 | 196 | 20-80 | 15--25 | 45 | 32 | 5 | 220 | 510 | 2 |
| JWM105/25 | 105 | 25 | 295 | 20-70 | 15--25 | 55 | 45 | 5 | 220 | 610 | 3 |
| JWM120/25 | 120 | 25 | 390 | 20-60 | 15--25 | 75 | 54 | 6 | 220 | 660 | 3.5 |
| JWM135/25 | 135 | 25 | 535 | 20-60 | 15--25 | 90 | 63 | 6 | 220 | 660 | 4.2 |
| JWM150/25 | 150 | 25 | 652 | 20-60 | 15--25 | 110 | 76.5 | 6 | 380 | 710 | 5 |
| JWM160/25 | 160 | 25 | 705 | 20-60 | 15--25 | 132 | 85.5 | 6 | 380 | 710 | 6 |
| JWM170/25 | 170 | 25 | 850 | 20-60 | 15--25 | 160 | 103.5 | 6 | 380 | 720 | 8 |
| JWM180/25 | 180 | 25 | 972 | 20-60 | 15--25 | 185 | 110 | 7 | 380 | 800 | 10 |
| JWM200/25 | 190 | 25 | 1050 | 20-60 | 15--25 | 200 | 150 | 7 | 380 | 1000 | 12 |
PP Non-woven Fabrics Extruder
JWM series Non-woven fabrics Extruder are specialized in PP Non-woven fabrics production. Normally it uses two extruders in series. the screw L/D of the main extruder is 30:1, the ancillary extruder mainly used for machining leftover material and flot- sam drapery which can be recycled on the line, the L/D is mainly 15:1. various kinds of the extruder model for different width Non-woven fabrics products.
| Extruder Model | L/D Ratio | Speed (RPM) | Transmission Power kw | Heating Power kw | Heating Zone | Heating Voltage | Center Height mm | Weight (T) | Opomba |
|---|---|---|---|---|---|---|---|---|---|
| JWM135/30 | 30 | 20--60 | 75 | 80 | 6 | 220 | 660 | 4.5 | suitable for 1.6m |
| JWM105/15 | 15 | 20--80 | 15/18.5 | 18 | 4 | 220 | 660 | 2 | suitable for 1.6m |
| JWM150/30 | 30 | 20--60 | 110 | 90 | 7 | 380 | 710 | 5.5 | suitable for 2.4m |
| JWM105/15 | 15 | 20--80 | 15/18.5 | 18 | 4 | 220 | 710 | 2 | suitable for 2.4m |
| JWM160/30 | 30 | 20--60 | 132 | 100 | 7 | 380 | 710 | 6.5 | suitable for 2.4m |
| JWM105/15 | 15 | 20--80 | 22 | 18 | 4 | 220 | 710 | 2 | suitable for 2.4m |
| JWM170/30 | 30 | 20--60 | 132 | 110 | 7 | 380 | 710 | 8.5 | suitable for 3.2m |
| JWM105/15 | 15 | 20--80 | 22 | 18 | 4 | 220 | 710 | 2 | suitable for 3.2m |
| JWM180/30 | 30 | 20--50 | 160 | 120 | 7 | 380 | 720 | 10.5 | suitable for 3.2m |
| JWM120/15 | 15 | 20--80 | 30 | 24 | 4 | 220 | 720 | 2.5 | suitable for 3.2m |
JWS45/25 single Screw Extruder for Ultra High Molecular Weight Polyethylene (UHMW-PE)
The extruder has our patented design for screw and barrel, which can be used to process more than 1.5 million molecular of the powder material. By overcoming poor flow ability, Mechanical Properties decreasing due to easy degaradation, etc. The extruder can have stable output and reliable plasticization during production. Also the extruder equips high efficient and energy saving driving motor, infrared energy-saving heaters, reducing energy comsumption.
The extruder has a compact structure, beautiful appearance, small space, easy operation etc, can be used to produce a variety of small plates, profiles, rods production.
| Model No. | JWS45/25 |
| Screw RPM | 3–25 |
| Zmogljivost (kg/h) | 3–10 |
| Motor Power(kw) | 5.5 |
| Heating Power( kw) | 9.4 |
screw and barrel Machining Process
POGOSTA VPRAŠANJA
- Mednarodni trgovinski pogoji (Incoterms): FOB, CFR, CIF, EXW.
- Plačilni pogoji: LC, T/T
- Povprečni čas izvedbe: Čas priprave v vrhuncu sezone: 3-6 mesecev, izven sezone: 1-3 mesece.
- Število osebja za trgovanje v tujini: >50 ljudi
Da, imamo 5 proizvodnih baz in prodajni center v Šanghaju, Suzhouju, Changzhouju, Zhou Shanu in Dongguanu na Kitajskem.
Podjetje Jwell je leta 1978 izdelalo prvi kitajski vijak in sod z blagovno znamko Jinhailuo.Po več kot 40 letih razvoja,
JWELL je eden največjih dobaviteljev strojev za ekstrudiranje na Kitajskem s 300 inženirji za načrtovanje in testiranje ter 3000 zaposlenimi.
Podjetje Jwell je postalo glavni dobavitelj ekstruzijskih linij in zanesljiv poslovni partner. Dobrodošli pri nas.
Naši stroji, ki upoštevajo evropske standarde in sledijo nemškemu načinu poslovanja, sodelujejo z
Mednarodne znane blagovne znamke Siemens Schneider Flender Omron ABB WEG Falk Fuji itd. Naše podjetje nenehno
uvaža več kot 1000 mednarodnih prvovrstnih visoko preciznih obdelovalnih naprav, kot so večstopenjski obdelovalni centri, CNC stružnice in CNC rezkalni stroji iz Koreje, Japonske itd. Vsi naši postopki strogo upoštevajo certifikat CE,
Sistem vodenja kakovosti IS09001 in 2008. Imamo 12 mesecev garancijskega časa za kakovost. Preizkušamo
zmogljivosti stroja pred vsako dobavo. Servisni inženirji podjetja Jwell bodo vedno na voljo za vse, kar boste potrebovali.
Običajno traja približno 1 do 4 mesece, odvisno od različnih strojev, po prejemu predplačila za naročilo.
Ko so vam jasne vaše zahteve in določena linija za iztiskanje, je idealna za vas. vam bomo poslali tehnične rešitve in
Račun na obrazcu, ki vam ga pošljemo. Plačate lahko z bančnim nakazilom TT, LC, kot želite.
Prvi. Zagotavljamo tako linije za iztiskanje po meri kot tehnične rešitve. Dobrodošli v stik z nami za tehnične
inovacije ali izboljšave za vaš prihodnji nabavni načrt.
Vsako leto po vsem svetu proizvedemo več kot 2000 naprednih linij za iztiskanje.
Za nujne primere lahko majhne nadomestne dele pošljemo z zračnim ekspresom. Celotno proizvodno linijo pa po morju.
da bi prihranili stroške. Uporabite lahko svojega pooblaščenega špediterja ali našega kooperativnega špediterja. Najbližji
pristanišče je Kitajska Šanghaj, pristanišče Ningbo, ki je priročno za pomorski promet.
Da, svoje poslovne partnerje podpiramo s storitvami pred prodajo in po njej. Jwell ima več kot 300 tehničnih testiranj
inženirji potujejo po vsem svetu. Na vse primere se bomo odzvali s hitrimi rešitvami. Zagotavljamo usposabljanje, testiranje,
storitve obratovanja in vzdrževanja za celotno življenjsko dobo.
Potrdila
Potrjeno s strani: SGS
oprema za ekstrudiranje po toku
2015-07-23 ~ 2020-07-23
Potrjeno s strani: SGS
oprema za ekstrudiranje po toku
2015-07-23 ~ 2020-07-23
Potrjeno s strani: SGS
oprema za ekstrudiranje po toku
2015-07-23 ~ 2020-07-23
Potrjeno s strani: SGS
oprema za ekstrudiranje po toku
2015-07-23 ~ 2020-07-23
Certificirano s strani:Drugo
Oblikovanje, razvoj, proizvodnja in prodaja upravljanja pravic intelektualne lastnine za plastične stroje
2016-06-14 ~ 2019-06-13
Certificirano s strani:Drugo
Oblikovanje, razvoj, proizvodnja in prodaja proizvodne linije za iztiskanje plastičnih cevi in listov
2018-11-20 ~ 2021-11-19
Certificiral:Quality Austria Training, Certification and Evaluation Ltd
Linija za iztiskanje plastike
2010-01-29 ~
Preverjeno Proizvajalec
Preverjeno na kraju samem s strani vodilnega svetovnega kontrolnega podjetja Bureau Veritas na ALIBABA.com
- Ocenjeni videoposnetki dobaviteljev
- Panoramske slike
- Poročila o tovarniških pregledih
- Preverjene proizvodne linije
- Certifikati: ISO
Sorodni izdelki
-
-
Učinkovit valjček za tanke stene
Komponenta -
Serija Film Die
Komponenta -
Valjček
Komponenta
English 
Russian 
Spanish 
Arabic 
German 
French 
Persian 
Turkish 
Bulgarian 
Czech 
Dutch 
Greek 
Indonesian 
Japanese 
Korean 
Polish 
Portuguese 
Romanian 
Slovenian 
Ukrainian 