Schroefmatrijs
- Materiaal: gelegeerd staal
- Toepassing: warmte- en nitreerbehandeling
- Model: Schroef en vat (single/twin)
- Geschikt kunststofmateriaal: PP, PE, ABS, PS enz.
- Effectieve lengte: 12000mm
- Bimetaal type: centrifugale gieten
- Haven: Shanghai, China
- Internationale Handelstermen (Incoterms): FOB, CFR, CIF, EXW
- Betalingsvoorwaarden: LC, T/T
- Certificering: CE, ISO, UL, QS, GMP
- Garantie: 1 jaar
- Gemiddelde doorlooptijd: Doorlooptijd hoogseizoen: 3-6 maanden, doorlooptijd laagseizoen: 1-3 maanden
screw and barrel
Single screw and barrel
Materiaal
Alloy –steel of High-quality
1) 38 CrMoA LA (JIS SACM645)
2) 42 CrMo(JIS SCM440)
3) 9 Cr18MoV
4) CW6Mo5Cr4V2
Heat-treatment
Nitriding treatment
Electroplated hard-chrome finish
Spray coating Bimetallic-alloy
Twin screw and barrel
Materiaal
Alloy –steel of High-quality
1) 38 CrMoA LA (JIS SACM645)
2) 9 Cr18MoV
Heat-treatment
Nitriding treatment
Spray coating Bimetallic-alloy
Technical data
Depth of nitration layer: 0.50 -0.80mm
Hardness of nitration: 900-1000HV
Fragility of nitration:Less than grade 1
Roughness of the surface:Ra0.4
Linearity of the screw: 0.015mm
The surface hard chromium plating hardness after
Nitrogenation: ≥ 950Hv
Chrome-plating layer thickness: 0.025 -0.085mm
screw and barrel Technical details
● Base material : 45# 40Cr
● Bimetallic type: Centrifugal casting
● Application: Injection molding machine & Extruder
● Products range: Inner diameter ?12- ?300mm
● Effective Length: 12000mm
● Nitrided layer thickness: 0.50-0.80mm
● Hardness: HV960
● Straightness: 0.015mm/m
● Chrome coated layer: 0.02-0.085mm
● Suitable plastic material: PP, PE, ABS, AS, PS etc.
● Material: ACM645, SCM440 , 38CrMoAIA
screw and barrel Application
All kinds of SJZ and SJP extruders that our company designs especially for producing the PVC pipe and profile, our extruders can promise a good plasticization, high capacity and advanced electric control, and the electrical cabinet can be chosen by customer according to their own demands.leo.
For pipe Extrusion
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Weight (kg) | Dimension (M) |
|---|---|---|---|---|---|---|
| SJZ45/100 | 45 | 15/18.5 | 110 | 1050 | 3000 | 3.3*1.2*2.1 |
| SJZ50/105 | 45 | 18.5/22 | 125 | 1050 | 3000 | 3.6*1.1*2.1 |
| SJZ55/110 | 45 | 22/30 | 180 | 1050 | 3500 | 3.6*1.1*2.1 |
| SJZ65/132 | 45 | 37 | 380 | 1050 | 4000 | 4.2*1.5*2.4 |
| SJZ80/156 | 34.7 | 55 | 500 | 1050 | 5500 | 4.7*1.5*2.4 |
| SJZ80/173 | 37.6 | 75 | 680 | 1050 | 6000 | 3.9*1.6*2.5 |
| SJZ92/188 | 34.7 | 110 | 800 | 1100 | 8000 | 6*1.6*2.5 |
| SJZ110/220 | 34.7 | 160 | 1400 | 1100 | 9000 | 6.5*1.6*2.5 |
For Profile Extrusion
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Weight (kg) | Dimension (M) |
|---|---|---|---|---|---|---|
| SJZ45/100 | 34.7 | 15 | 60-80 | 1050 | 2500 | 3.3*1.2*2.1 |
| SJZ51/105 | 34.7 | 18.5 | 80-120 | 1050 | 3000 | 3.6*1.1*2.1 |
| SJZ55/110 | 34.7 | 22 | 100-150 | 1050 | 3500 | 3.6*1.1*2.1 |
| SJZ65/132 | 34.7 | 37/30 | 180-250 | 1050 | 4000 | 4.2*1.5*2.4 |
| SJZ80/156 | 34.7 | 55 | 300-400 | 1050 | 5500 | 4.7*1.5*2.4 |
| SJZ80/173 | 34.7 | 75 | 500-600 | 1050 | 6000 | 3.9*1.6*2.5 |
| SJZ92/188 | 34.7 | 110 | 600-800 | 1100 | 8000 | 6*1.6*2.5 |
| SJZ110/220 | 34.7 | 160 | 1200-1400 | 1100 | 10000 | 6.5*1.6*2.5 |
For production of PVC pipe
| Extrud Model | Speed (RPM) | Motor (KW) | L/D Ratio | Capacity (kg/h) | Center Height (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| SJP75/28 | 45 | 45 | 28:01:00 | 220-350 | 1050 | 4100 |
| SJP93/28/31 | 45 | 75 | 28:1/31:1 | 380-460 | 1050 | 4700 |
| SJP110/31 | 45 | 110 | 31:01:00 | 680 | 1050 | 6500 |
| SJP120/31/26 | 45 | 132 | 31:01:00 | 850 | 1050 | 7500 |
| SJP135/31 | 45 | 160 | 31:01:00 | 1100 | 1050 | 8400 |
For production of Profile
| Extrud Model | Speed (RPM) | Motor (KW) | L/D Ratio | Capacity (kg/h) | Center Height (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| SJP75/28 | 36 | 37 | 28:01:00 | 240 | 1050 | 4100 |
| SJP93/28/31 | 36 | 55 | 28:1/31:1 | 350 | 1050 | 4700 |
| SJP110/28 | 35.8 | 75 | 28:01:00 | 460 | 1050 | 6500 |
| SJP120/26 | 34.3 | 110 | 26:01:00 | 550 | 1050 | 7500 |
| SJP130/26 | 34.3 | 132 | 26:01:00 | 680 | 1050 | 8400 |
For production of PVC hard material and various cables palletizing
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Total Power (KW) | Weight (kg) |
|---|---|---|---|---|---|
| JWT67/134 | 5-58 | 45 | 500-700 | 110 | 1800 |
Single Screw Extruder for HDPE Pipe
It is widely used in the area of water supply and gas supply. Feeding section is grooved structure with temperature controller, and easy to get high capacity and stable extrusion. With advanced BM screw structure, it is able to divide the HDPE material from solid to liquid.
High Efficient 38 Series
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|
| JWS60/40 | 60 | 40 | 90/110 | 360-450 | 1000 |
| JWS75/38 | 75 | 38 | 132/160 | 400-650 | 1000 |
| JWS90/38 | 90 | 38 | 250/280 | 800-1000 | 1150 |
| JWS120/38 | 120 | 38 | 315/355 | 900-1200 | 1300 |
Classic 33 Series
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|
| JWS45/33 | 45 | 33 | 18.5/22/30 | 60-100 | 1000 |
| JWS65/33 | 65 | 33 | 45/75/90 | 100-250 | 1000 |
| JWS75/33 | 75 | 33 | 110/132 | 250-350 | 1000 |
| JWS90/33 | 90 | 33 | 160/185 | 450-550 | 1150 |
| JWS120/33 | 120 | 33 | 280/315 | 700-900 | 1300 |
| JWS150/33 | 150 | 33 | 355/400 | 1000-1300 | 1300 |
Kenmerken:
By using the new type barrier screw design, this extruder has a high extrusion capacity in high RPM with the low energy consumption, and this extruder can gain a good mixing effect in the low temperature, and this extruder can control the material shearing to get the ideal and even melt temperature, so that the ripple mark in the inner wall of the big diameter pipe can be avoided.
Single Screw Extruder for HDPE Pipe
This model of equipment mainly used to extrude profile, the structure and form of screws and barrels vary a lot, and the screws and barrels are processed precisily which can gurantee a good plasticization, high capacity and can meet different customer’s needs, the electrical controling parts are equiped in high class which made it safe to operate.Suitable for PVC\PC\ABS Profile.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Polymer Processing |
|---|---|---|---|---|---|---|
| JWS45 | 45 | 25/28 | 11/15/18.5 | 10-100 | 1000 | PC/ABS/PC |
| JWS65 | 65 | 25/28 | 18.5/22/30 | 10-100 | 1000 | PVC/PC/ABS |
| JWS75 | 75 | 25/28 | 37 | 10-100 | 1000 | PVC/PC/ABS |
| JWS80 | 80 | 28/30 | 37 | 10-90 | 1000 | PP/ABS/PC |
| JWS90 | 28 | 28/30 | 45 | 10-90 | 1000 | PP/ABS/PS |
| JWS120 | 120 | 28/30 | 75 | 10-90 | 1000 | PC/ABS |
PVC PVG Conveyer Belt Cover Extruder
In order to the customer’s technics requirement for the conveter belt,Jwell successfully develops serials conveyer belt cover extruder and relation mould,it can be molding for the pvc belt’s surface,adjust the thickness of the cover,leave out the others.This extruder install on the left and right,have good plastic,high output,low power and the high design for the produce method.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Capacity (kg/h) | Center Height (mm) | Weight (T) | Dimension (MM) |
|---|---|---|---|---|---|---|---|
| JWS90/30 | 90 | 30 | 10-45 | 150 | 1200 | 4 | 3650*2520*2100 |
| JWS120/28 | 120 | 28 | 10-45 | 300 | 1200 | 5 | 4500*2520*2200 |
| JWS150/28 | 150 | 28 | 10-45 | 400 | 1200 | 6.5 | 5500*2520*2300 |
PS PC Electronic Narrow Band Extruder
PS/PC narrow band is a king of packaging products, mainly for the IC, resistance, inductance, capacitance, connectors, fuses,switches and other electronice components of the packaging. This product is currently PS and PC for three layers of composite extrusion.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Speed (RPM) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|
| JWS45 | 45 | 28 | 11 | 10-75 | 10--75 | 1000 |
| JWS35 | 35 | 28 | 7.5 | 10-75 | 10--75 | 1000 |
All kinds of co-extrusion machine
n order to meet the actual needs of various customers, the company can provide all kinds of uses co-extrusion machine, used for profile pre and after Co-extrusion, or wood plastic products surface coating, mark line for pipes according to customers[ special requirements, special design custom-made.
For Pipe Mark Line
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Motor (KW) | Barrel Heating(KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|---|
| JWS25/25A | 25 | 25 | 1--15 | 0.75 | 3 | 3 | 1100±50 |
| JWS25/25B | 25 | 25 | 1-50 | 1.5 | 3 | 8 | 1100±50 |
| JWS30/28 | 30 | 28 | 1-50 | 3 | 3.6 | 10 | 1100±100 |
For Profile Co-Extrusion
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Motor (KW) | Barrel Heating(KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|---|
| JWS30/25 | 30 | 25 | 1-60 | 3--4 | 3 | 8--10 | 800-1200 adjustable |
| JWS35/25 | 35 | 25 | 1-50 | 4--5.5 | 6.9 | 10--12 | 800-1200 adjustable |
| JWS45/25 | 45 | 25 | 1-58 | 5.5--7.5 | 9 | 20--25 | 1100±100 |
| JWS50/25 | 50 | 25/28 | 1-58 | 11--15 | 10 | 25--35 | 1100±100 |
| JWS65/25 | 65 | 25/28 | 1-80 | 15--22 | 12 | 35--40 | 1100±100 |
| SJZ35/75 | 35/75 | 22.97 | 1-39 | 11 | 9 | 35--40 | Adjustable |
Spinning Extruder
JWM series extruders are used for melt spining of PET, PA6, PA66, PP chips.
The LTM designed in screw, and the melt quality is better. The precision of screw and barrel is higher after professional proce ssing. And equiped high precision bevel-teeth gear box, operating stability, lowest noise.
assemble strong push bearing. in ord to guarantee bearing huge axle power. and be able to select to equip imported high speed bearing and seal parts.
| Extruder Model | Speed (RPM) | L/D Ratio | Capacity (kg/h) | Speed (RPM) | Pressure Mpa | Transmission Power kw | Heating Power kw | Heating Zone | Heating Voltage | Center Height mm | Weight (T) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JWM45/25 | 45 | 25 | 38 | 20-90 | 15--25 | 7.5 | 8 | 3 | 220 | 340 | 1 |
| JWM65/25 | 65 | 25 | 78 | 20-90 | 15--25 | 18.5 | 16 | 5 | 220 | 340 | 1.3 |
| JWM80/25 | 80 | 25 | 115 | 20-80 | 15--25 | 37 | 27 | 5 | 220 | 510 | 1.8 |
| JWM90/25 | 90 | 25 | 196 | 20-80 | 15--25 | 45 | 32 | 5 | 220 | 510 | 2 |
| JWM105/25 | 105 | 25 | 295 | 20-70 | 15--25 | 55 | 45 | 5 | 220 | 610 | 3 |
| JWM120/25 | 120 | 25 | 390 | 20-60 | 15--25 | 75 | 54 | 6 | 220 | 660 | 3.5 |
| JWM135/25 | 135 | 25 | 535 | 20-60 | 15--25 | 90 | 63 | 6 | 220 | 660 | 4.2 |
| JWM150/25 | 150 | 25 | 652 | 20-60 | 15--25 | 110 | 76.5 | 6 | 380 | 710 | 5 |
| JWM160/25 | 160 | 25 | 705 | 20-60 | 15--25 | 132 | 85.5 | 6 | 380 | 710 | 6 |
| JWM170/25 | 170 | 25 | 850 | 20-60 | 15--25 | 160 | 103.5 | 6 | 380 | 720 | 8 |
| JWM180/25 | 180 | 25 | 972 | 20-60 | 15--25 | 185 | 110 | 7 | 380 | 800 | 10 |
| JWM200/25 | 190 | 25 | 1050 | 20-60 | 15--25 | 200 | 150 | 7 | 380 | 1000 | 12 |
PP Non-woven Fabrics Extruder
JWM series Non-woven fabrics Extruder are specialized in PP Non-woven fabrics production. Normally it uses two extruders in series. the screw L/D of the main extruder is 30:1, the ancillary extruder mainly used for machining leftover material and flot- sam drapery which can be recycled on the line, the L/D is mainly 15:1. various kinds of the extruder model for different width Non-woven fabrics products.
| Extruder Model | L/D Ratio | Speed (RPM) | Transmission Power kw | Heating Power kw | Heating Zone | Heating Voltage | Center Height mm | Weight (T) | Opmerking |
|---|---|---|---|---|---|---|---|---|---|
| JWM135/30 | 30 | 20--60 | 75 | 80 | 6 | 220 | 660 | 4.5 | suitable for 1.6m |
| JWM105/15 | 15 | 20--80 | 15/18.5 | 18 | 4 | 220 | 660 | 2 | suitable for 1.6m |
| JWM150/30 | 30 | 20--60 | 110 | 90 | 7 | 380 | 710 | 5.5 | suitable for 2.4m |
| JWM105/15 | 15 | 20--80 | 15/18.5 | 18 | 4 | 220 | 710 | 2 | suitable for 2.4m |
| JWM160/30 | 30 | 20--60 | 132 | 100 | 7 | 380 | 710 | 6.5 | suitable for 2.4m |
| JWM105/15 | 15 | 20--80 | 22 | 18 | 4 | 220 | 710 | 2 | suitable for 2.4m |
| JWM170/30 | 30 | 20--60 | 132 | 110 | 7 | 380 | 710 | 8.5 | suitable for 3.2m |
| JWM105/15 | 15 | 20--80 | 22 | 18 | 4 | 220 | 710 | 2 | suitable for 3.2m |
| JWM180/30 | 30 | 20--50 | 160 | 120 | 7 | 380 | 720 | 10.5 | suitable for 3.2m |
| JWM120/15 | 15 | 20--80 | 30 | 24 | 4 | 220 | 720 | 2.5 | suitable for 3.2m |
JWS45/25 single Screw Extruder for Ultra High Molecular Weight Polyethylene (UHMW-PE)
The extruder has our patented design for screw and barrel, which can be used to process more than 1.5 million molecular of the powder material. By overcoming poor flow ability, Mechanical Properties decreasing due to easy degaradation, etc. The extruder can have stable output and reliable plasticization during production. Also the extruder equips high efficient and energy saving driving motor, infrared energy-saving heaters, reducing energy comsumption.
The extruder has a compact structure, beautiful appearance, small space, easy operation etc, can be used to produce a variety of small plates, profiles, rods production.
| Model No. | JWS45/25 |
| Screw RPM | 3–25 |
| Capaciteit (kg/h) | 3–10 |
| Motor Power(kw) | 5.5 |
| Heating Power( kw) | 9.4 |
screw and barrel Machining Process
FAQ
- Internationale Handelstermen (Incoterms): FOB, CFR, CIF, EXW
- Betalingsvoorwaarden: LC, T/T
- Gemiddelde doorlooptijd: Doorlooptijd hoogseizoen: 3-6 maanden, doorlooptijd laagseizoen: 1-3 maanden
- Aantal buitenlandse handelsmedewerkers: >50 mensen
Ja, we hebben 5 productievestigingen en verkoopcentra in Shanghai, Suzhou, Changzhou, Zhou Shan, Dongguan China.
Jwell maakte de eerste Chinese schroef en het vat in 1978 in merknaam Jinhailuo.After meer dan 40 jaar ontwikkeling,
JWELL is één van de grootste leverancier van de uitdrijvingsmachine in China met 300design&testingenieur, 3000 werknemers.
Jwell is uitgegroeid tot de belangrijkste leverancier van extrusielijnen en betrouwbare zakenpartners. Welkom bij ons.
Onze machines die de Europese normen nemen en het Duitslandtype van zaken volgen, wij samenwerking met
Internationale bekende merken Siemens Schneider Flender Omron ABB WEG Falk Fuji enz. Ons bedrijf voortdurend
importeert meer dan 1000 internationale eersteklas precisieverwerkingsapparatuur, zoals meertrapsbewerkingscentra, CNC-draaibanken en CNC-freesmachines uit Korea, Japan, enz. Al onze processen voldoen strikt aan de CE-certificering,
IS09001 en 2008 kwaliteitsmanagementsysteem. En we hebben 12 maanden kwaliteitsgarantie. We testen de
prestaties van de machine voor elke levering. De servicemonteurs van Jwell zijn er altijd voor alles wat u nodig hebt.
Meestal duurt het ongeveer 1 - 4 maanden, afhankelijk van de verschillende machines, na ontvangst van het voorschot van de bestelling.
Zodra duidelijk is wat je eisen zijn en welke extrusielijn ideaal is voor jou, sturen we je technische oplossingen. Wij sturen u technische oplossingen en
Proforma factuur aan u. Je kunt betalen via TT bankoverschrijving, LC zoals je wilt.
1. We bieden zowel aangepaste extrusielijnen als technische oplossingen. Welkom contact met ons op voor technische
innovatie of verbeteringen voor je toekomstige inkoopplan.
We produceren wereldwijd meer dan 2000 geavanceerde extrusielijnen per jaar.
Voor dringende zaken kunnen we de kleine reserveonderdelen per luchtexpres verzenden. En de volledige productielijn door overzees
om kosten te besparen. Je kunt gebruik maken van je eigen expediteur of van onze coöperatieve expediteur. De dichtstbijzijnde
haven is China Shanghai, Ningbo haven, die geschikt is voor maritiem transport....
Ja, we ondersteunen onze zakenpartners met de dienst na verkoop. Jwell heeft meer dan 300 technische testen
ingenieurs die over de hele wereld reizen. Alle gevallen worden beantwoord met snelle oplossingen. We bieden training, testen,
levenslange bediening en onderhoud.
Certificaten
Gecertificeerd door:SGS
extrusie downstream apparatuur
2015-07-23 ~ 2020-07-23
Gecertificeerd door:SGS
extrusie downstream apparatuur
2015-07-23 ~ 2020-07-23
Gecertificeerd door:SGS
extrusie downstream apparatuur
2015-07-23 ~ 2020-07-23
Gecertificeerd door:SGS
extrusie downstream apparatuur
2015-07-23 ~ 2020-07-23
Gecertificeerd door:Overige
Ontwerp, ontwikkeling, productie en verkoop van intellectuele eigendomsrechten voor plastic machines
2016-06-14 ~ 2019-06-13
Gecertificeerd door:Overige
Ontwerp, Ontwikkeling, Vervaardiging en Verkoop van de Plastic Lijn van de Pijp en van de Bladuitdrijving
2018-11-20 ~ 2021-11-19
Gecertificeerd door:Quality Austria Training, Certification and Evaluation Ltd
Kunststof extrusielijn
2010-01-29 ~
Geverifieerde fabrikant
Ter plaatse geverifieerd door het toonaangevende inspectiebedrijf Bureau Veritas op ALIBABA.com
- Door leveranciers beoordeelde video's
- Panoramafoto's
- Rapporten van fabrieksinspecties
- Gecontroleerde productielijnen
- Certificaten: ISO
Verwante producten
-
Casting filmrol
Component -
Elektromagnetische verwarmingsrol
Component -
Super spiegelrol
Component -
Rol
Component
English 
Russian 
Spanish 
Arabic 
German 
French 
Persian 
Turkish 
Bulgarian 
Czech 
Dutch 
Greek 
Indonesian 
Japanese 
Korean 
Polish 
Portuguese 
Romanian 
Slovenian 
Ukrainian 