Schraube&Fass
- Material: Legierter Stahl
- Anwendung: Wärme- und Nitrierbehandlung
- Modell: Schraube und Zylinder (einzeln/zwillingsweise)
- Geeignetes Kunststoffmaterial: PP, PE, ABS, PS usw.
- Effektive Länge: 12000mm
- Bimetalltyp: Schleuderguss
- Hafen: Shanghai, China
- International Commercial Terms(Incoterms): FOB, CFR, CIF, EXW
- Zahlungsbedingungen: LC, T/T
- Zertifizierung: CE, ISO, UL, QS, GMP
- Garantie: 1 Jahr
- Durchschnittliche Vorlaufzeit: Vorlaufzeit in der Hauptsaison: 3-6 Monate, Vorlaufzeit außerhalb der Saison: 1-3 Monate
screw and barrel
Single screw and barrel
Material
Alloy –steel of High-quality
1) 38 CrMoA LA (JIS SACM645)
2) 42 CrMo(JIS SCM440)
3) 9 Cr18MoV
4) CW6Mo5Cr4V2
Heat-treatment
Nitriding treatment
Electroplated hard-chrome finish
Spray coating Bimetallic-alloy
Twin screw and barrel
Material
Alloy –steel of High-quality
1) 38 CrMoA LA (JIS SACM645)
2) 9 Cr18MoV
Heat-treatment
Nitriding treatment
Spray coating Bimetallic-alloy
Technical data
Depth of nitration layer: 0.50 -0.80mm
Hardness of nitration: 900-1000HV
Fragility of nitration:Less than grade 1
Roughness of the surface:Ra0.4
Linearity of the screw: 0.015mm
The surface hard chromium plating hardness after
Nitrogenation: ≥ 950Hv
Chrome-plating layer thickness: 0.025 -0.085mm
screw and barrel Technical details
● Base material : 45# 40Cr
● Bimetallic type: Centrifugal casting
● Application: Injection molding machine & Extruder
● Products range: Inner diameter ?12- ?300mm
● Effective Length: 12000mm
● Nitrierte Schicht Dicke: 0.50-0.80 mm
● Hardness: HV960
● Straightness: 0.015mm/m
● Chrome coated layer: 0.02-0.085mm
● Suitable plastic material: PP, PE, ABS, AS, PS etc.
● Material: ACM645, SCM440 , 38CrMoAIA
screw and barrel Application
All kinds of SJZ and SJP extruders that our company designs especially for producing the PVC pipe and profile, our extruders can promise a good plasticization, high capacity and advanced electric control, and the electrical cabinet can be chosen by customer according to their own demands.leo.
For pipe Extrusion
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Weight (kg) | Dimension (M) |
|---|---|---|---|---|---|---|
| SJZ45/100 | 45 | 15/18.5 | 110 | 1050 | 3000 | 3.3*1.2*2.1 |
| SJZ50/105 | 45 | 18.5/22 | 125 | 1050 | 3000 | 3.6*1.1*2.1 |
| SJZ55/110 | 45 | 22/30 | 180 | 1050 | 3500 | 3.6*1.1*2.1 |
| SJZ65/132 | 45 | 37 | 380 | 1050 | 4000 | 4.2*1.5*2.4 |
| SJZ80/156 | 34.7 | 55 | 500 | 1050 | 5500 | 4.7*1.5*2.4 |
| SJZ80/173 | 37.6 | 75 | 680 | 1050 | 6000 | 3.9*1.6*2.5 |
| SJZ92/188 | 34.7 | 110 | 800 | 1100 | 8000 | 6*1.6*2.5 |
| SJZ110/220 | 34.7 | 160 | 1400 | 1100 | 9000 | 6.5*1.6*2.5 |
For Profile Extrusion
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Weight (kg) | Dimension (M) |
|---|---|---|---|---|---|---|
| SJZ45/100 | 34.7 | 15 | 60-80 | 1050 | 2500 | 3.3*1.2*2.1 |
| SJZ51/105 | 34.7 | 18.5 | 80-120 | 1050 | 3000 | 3.6*1.1*2.1 |
| SJZ55/110 | 34.7 | 22 | 100-150 | 1050 | 3500 | 3.6*1.1*2.1 |
| SJZ65/132 | 34.7 | 37/30 | 180-250 | 1050 | 4000 | 4.2*1.5*2.4 |
| SJZ80/156 | 34.7 | 55 | 300-400 | 1050 | 5500 | 4.7*1.5*2.4 |
| SJZ80/173 | 34.7 | 75 | 500-600 | 1050 | 6000 | 3.9*1.6*2.5 |
| SJZ92/188 | 34.7 | 110 | 600-800 | 1100 | 8000 | 6*1.6*2.5 |
| SJZ110/220 | 34.7 | 160 | 1200-1400 | 1100 | 10000 | 6.5*1.6*2.5 |
For production of PVC pipe
| Extrud Model | Speed (RPM) | Motor (KW) | L/D Ratio | Capacity (kg/h) | Center Height (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| SJP75/28 | 45 | 45 | 28:01:00 | 220-350 | 1050 | 4100 |
| SJP93/28/31 | 45 | 75 | 28:1/31:1 | 380-460 | 1050 | 4700 |
| SJP110/31 | 45 | 110 | 31:01:00 | 680 | 1050 | 6500 |
| SJP120/31/26 | 45 | 132 | 31:01:00 | 850 | 1050 | 7500 |
| SJP135/31 | 45 | 160 | 31:01:00 | 1100 | 1050 | 8400 |
For production of Profile
| Extrud Model | Speed (RPM) | Motor (KW) | L/D Ratio | Capacity (kg/h) | Center Height (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| SJP75/28 | 36 | 37 | 28:01:00 | 240 | 1050 | 4100 |
| SJP93/28/31 | 36 | 55 | 28:1/31:1 | 350 | 1050 | 4700 |
| SJP110/28 | 35.8 | 75 | 28:01:00 | 460 | 1050 | 6500 |
| SJP120/26 | 34.3 | 110 | 26:01:00 | 550 | 1050 | 7500 |
| SJP130/26 | 34.3 | 132 | 26:01:00 | 680 | 1050 | 8400 |
For production of PVC hard material and various cables palletizing
| Extruder Model | Speed (RPM) | Motor (KW) | Capacity (kg/h) | Total Power (KW) | Weight (kg) |
|---|---|---|---|---|---|
| JWT67/134 | 5-58 | 45 | 500-700 | 110 | 1800 |
Single Screw Extruder for HDPE Pipe
It is widely used in the area of water supply and gas supply. Feeding section is grooved structure with temperature controller, and easy to get high capacity and stable extrusion. With advanced BM screw structure, it is able to divide the HDPE material from solid to liquid.
High Efficient 38 Series
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|
| JWS60/40 | 60 | 40 | 90/110 | 360-450 | 1000 |
| JWS75/38 | 75 | 38 | 132/160 | 400-650 | 1000 |
| JWS90/38 | 90 | 38 | 250/280 | 800-1000 | 1150 |
| JWS120/38 | 120 | 38 | 315/355 | 900-1200 | 1300 |
Classic 33 Series
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|
| JWS45/33 | 45 | 33 | 18.5/22/30 | 60-100 | 1000 |
| JWS65/33 | 65 | 33 | 45/75/90 | 100-250 | 1000 |
| JWS75/33 | 75 | 33 | 110/132 | 250-350 | 1000 |
| JWS90/33 | 90 | 33 | 160/185 | 450-550 | 1150 |
| JWS120/33 | 120 | 33 | 280/315 | 700-900 | 1300 |
| JWS150/33 | 150 | 33 | 355/400 | 1000-1300 | 1300 |
Merkmale:
By using the new type barrier screw design, this extruder has a high extrusion capacity in high RPM with the low energy consumption, and this extruder can gain a good mixing effect in the low temperature, and this extruder can control the material shearing to get the ideal and even melt temperature, so that the ripple mark in the inner wall of the big diameter pipe can be avoided.
Single Screw Extruder for HDPE Pipe
This model of equipment mainly used to extrude profile, the structure and form of screws and barrels vary a lot, and the screws and barrels are processed precisily which can gurantee a good plasticization, high capacity and can meet different customer’s needs, the electrical controling parts are equiped in high class which made it safe to operate.Suitable for PVC\PC\ABS Profile.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Capacity (kg/h) | Center Height (mm) | Polymer Processing |
|---|---|---|---|---|---|---|
| JWS45 | 45 | 25/28 | 11/15/18.5 | 10-100 | 1000 | PC/ABS/PC |
| JWS65 | 65 | 25/28 | 18.5/22/30 | 10-100 | 1000 | PVC/PC/ABS |
| JWS75 | 75 | 25/28 | 37 | 10-100 | 1000 | PVC/PC/ABS |
| JWS80 | 80 | 28/30 | 37 | 10-90 | 1000 | PP/ABS/PC |
| JWS90 | 28 | 28/30 | 45 | 10-90 | 1000 | PP/ABS/PS |
| JWS120 | 120 | 28/30 | 75 | 10-90 | 1000 | PC/ABS |
PVC PVG Conveyer Belt Cover Extruder
In order to the customer’s technics requirement for the conveter belt,Jwell successfully develops serials conveyer belt cover extruder and relation mould,it can be molding for the pvc belt’s surface,adjust the thickness of the cover,leave out the others.This extruder install on the left and right,have good plastic,high output,low power and the high design for the produce method.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Capacity (kg/h) | Center Height (mm) | Weight (T) | Dimension (MM) |
|---|---|---|---|---|---|---|---|
| JWS90/30 | 90 | 30 | 10-45 | 150 | 1200 | 4 | 3650*2520*2100 |
| JWS120/28 | 120 | 28 | 10-45 | 300 | 1200 | 5 | 4500*2520*2200 |
| JWS150/28 | 150 | 28 | 10-45 | 400 | 1200 | 6.5 | 5500*2520*2300 |
PS PC Electronic Narrow Band Extruder
PS/PC narrow band is a king of packaging products, mainly for the IC, resistance, inductance, capacitance, connectors, fuses,switches and other electronice components of the packaging. This product is currently PS and PC for three layers of composite extrusion.
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Motor (KW) | Speed (RPM) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|
| JWS45 | 45 | 28 | 11 | 10-75 | 10--75 | 1000 |
| JWS35 | 35 | 28 | 7.5 | 10-75 | 10--75 | 1000 |
All kinds of co-extrusion machine
n order to meet the actual needs of various customers, the company can provide all kinds of uses co-extrusion machine, used for profile pre and after Co-extrusion, or wood plastic products surface coating, mark line for pipes according to customers[ special requirements, special design custom-made.
For Pipe Mark Line
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Motor (KW) | Barrel Heating(KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|---|
| JWS25/25A | 25 | 25 | 1--15 | 0.75 | 3 | 3 | 1100±50 |
| JWS25/25B | 25 | 25 | 1-50 | 1.5 | 3 | 8 | 1100±50 |
| JWS30/28 | 30 | 28 | 1-50 | 3 | 3.6 | 10 | 1100±100 |
For Profile Co-Extrusion
| Extruder Model | Screw Dia.(mm) | L/D Ratio | Speed (RPM) | Motor (KW) | Barrel Heating(KW) | Capacity (kg/h) | Center Height (mm) |
|---|---|---|---|---|---|---|---|
| JWS30/25 | 30 | 25 | 1-60 | 3--4 | 3 | 8--10 | 800-1200 adjustable |
| JWS35/25 | 35 | 25 | 1-50 | 4--5.5 | 6.9 | 10--12 | 800-1200 adjustable |
| JWS45/25 | 45 | 25 | 1-58 | 5.5--7.5 | 9 | 20--25 | 1100±100 |
| JWS50/25 | 50 | 25/28 | 1-58 | 11--15 | 10 | 25--35 | 1100±100 |
| JWS65/25 | 65 | 25/28 | 1-80 | 15--22 | 12 | 35--40 | 1100±100 |
| SJZ35/75 | 35/75 | 22.97 | 1-39 | 11 | 9 | 35--40 | Adjustable |
Spinning Extruder
JWM series extruders are used for melt spining of PET, PA6, PA66, PP chips.
The LTM designed in screw, and the melt quality is better. The precision of screw and barrel is higher after professional proce ssing. And equiped high precision bevel-teeth gear box, operating stability, lowest noise.
assemble strong push bearing. in ord to guarantee bearing huge axle power. and be able to select to equip imported high speed bearing and seal parts.
| Extruder Model | Speed (RPM) | L/D Ratio | Capacity (kg/h) | Speed (RPM) | Pressure Mpa | Transmission Power kw | Heating Power kw | Heating Zone | Heating Voltage | Center Height mm | Weight (T) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JWM45/25 | 45 | 25 | 38 | 20-90 | 15--25 | 7.5 | 8 | 3 | 220 | 340 | 1 |
| JWM65/25 | 65 | 25 | 78 | 20-90 | 15--25 | 18.5 | 16 | 5 | 220 | 340 | 1.3 |
| JWM80/25 | 80 | 25 | 115 | 20-80 | 15--25 | 37 | 27 | 5 | 220 | 510 | 1.8 |
| JWM90/25 | 90 | 25 | 196 | 20-80 | 15--25 | 45 | 32 | 5 | 220 | 510 | 2 |
| JWM105/25 | 105 | 25 | 295 | 20-70 | 15--25 | 55 | 45 | 5 | 220 | 610 | 3 |
| JWM120/25 | 120 | 25 | 390 | 20-60 | 15--25 | 75 | 54 | 6 | 220 | 660 | 3.5 |
| JWM135/25 | 135 | 25 | 535 | 20-60 | 15--25 | 90 | 63 | 6 | 220 | 660 | 4.2 |
| JWM150/25 | 150 | 25 | 652 | 20-60 | 15--25 | 110 | 76.5 | 6 | 380 | 710 | 5 |
| JWM160/25 | 160 | 25 | 705 | 20-60 | 15--25 | 132 | 85.5 | 6 | 380 | 710 | 6 |
| JWM170/25 | 170 | 25 | 850 | 20-60 | 15--25 | 160 | 103.5 | 6 | 380 | 720 | 8 |
| JWM180/25 | 180 | 25 | 972 | 20-60 | 15--25 | 185 | 110 | 7 | 380 | 800 | 10 |
| JWM200/25 | 190 | 25 | 1050 | 20-60 | 15--25 | 200 | 150 | 7 | 380 | 1000 | 12 |
PP Non-woven Fabrics Extruder
JWM series Non-woven fabrics Extruder are specialized in PP Non-woven fabrics production. Normally it uses two extruders in series. the screw L/D of the main extruder is 30:1, the ancillary extruder mainly used for machining leftover material and flot- sam drapery which can be recycled on the line, the L/D is mainly 15:1. various kinds of the extruder model for different width Non-woven fabrics products.
| Extruder Model | L/D Ratio | Speed (RPM) | Transmission Power kw | Heating Power kw | Heating Zone | Heating Voltage | Center Height mm | Weight (T) | Hinweis |
|---|---|---|---|---|---|---|---|---|---|
| JWM135/30 | 30 | 20--60 | 75 | 80 | 6 | 220 | 660 | 4.5 | suitable for 1.6m |
| JWM105/15 | 15 | 20--80 | 15/18.5 | 18 | 4 | 220 | 660 | 2 | suitable for 1.6m |
| JWM150/30 | 30 | 20--60 | 110 | 90 | 7 | 380 | 710 | 5.5 | suitable for 2.4m |
| JWM105/15 | 15 | 20--80 | 15/18.5 | 18 | 4 | 220 | 710 | 2 | suitable for 2.4m |
| JWM160/30 | 30 | 20--60 | 132 | 100 | 7 | 380 | 710 | 6.5 | suitable for 2.4m |
| JWM105/15 | 15 | 20--80 | 22 | 18 | 4 | 220 | 710 | 2 | suitable for 2.4m |
| JWM170/30 | 30 | 20--60 | 132 | 110 | 7 | 380 | 710 | 8.5 | suitable for 3.2m |
| JWM105/15 | 15 | 20--80 | 22 | 18 | 4 | 220 | 710 | 2 | suitable for 3.2m |
| JWM180/30 | 30 | 20--50 | 160 | 120 | 7 | 380 | 720 | 10.5 | suitable for 3.2m |
| JWM120/15 | 15 | 20--80 | 30 | 24 | 4 | 220 | 720 | 2.5 | suitable for 3.2m |
JWS45/25 single Screw Extruder for Ultra High Molecular Weight Polyethylene (UHMW-PE)
The extruder has our patented design for screw and barrel, which can be used to process more than 1.5 million molecular of the powder material. By overcoming poor flow ability, Mechanical Properties decreasing due to easy degaradation, etc. The extruder can have stable output and reliable plasticization during production. Also the extruder equips high efficient and energy saving driving motor, infrared energy-saving heaters, reducing energy comsumption.
The extruder has a compact structure, beautiful appearance, small space, easy operation etc, can be used to produce a variety of small plates, profiles, rods production.
| Model No. | JWS45/25 |
| Screw RPM | 3–25 |
| Kapazität (kg/h) | 3–10 |
| Motor Power(kw) | 5.5 |
| Heating Power( kw) | 9.4 |
screw and barrel Machining Process
FAQ
- International Commercial Terms(Incoterms): FOB, CFR, CIF, EXW
- Zahlungsbedingungen: LC, T/T
- Durchschnittliche Vorlaufzeit: Vorlaufzeit in der Hauptsaison: 3-6 Monate, Vorlaufzeit außerhalb der Saison: 1-3 Monate
- Anzahl der Ausländische Handel Mitarbeiter:>50 Personen
Ja, Wir eigenen 5 Produktionsstandorten und Vertriebs-center in Shanghai , Suzhou ,Changzhou, Zhou Shan, Dongguan China.
Jwell machte die erste chinesische Schraube und barrel in 1978 in Marke name Jinhailuo.Nach mehr als 40 Jahren Entwicklung,
JWELL ist einer der größten Anbieter von Extrusionsmaschinen in China mit 300 Design- und Testingenieuren und 3000 Mitarbeitern.
Jwell hat sich zum führenden Anbieter von Extrusionsanlagen und zuverlässige business Partner. Willkommen zu fallen in uns.
Unsere Maschinen entsprechen den europäischen Standards und folgen dem deutschen Geschäftsmodell, wir kooperieren mit
Internationalen berühmte Marken Siemens Schneider Flender Omron ABB WEG Falk Fuji etc.. Unsere Firma kontinuierlich
die Importe mehr als 1000 internationalen erste-Klasse high-Präzision Verarbeitung Ausrüstung wie Mehrstufen-Bearbeitungszentren, CNC-Drehmaschinen und CNC-Fräsmaschinen aus Korea, Japan etc. Alle unsere Prozesse halten sich strikt an die CE-Zertifizierung,
IS09001 und 2008 Qualität management system . Und wir haben 12 Monate Qualität Garantie Zeit. Wir testen die
Maschine performances, bevor jede Lieferung. Jwell service Ingenieure werden immer hier sein für alles, was Sie brauchte.
Es dauert in der Regel etwa 1 bis 4 Monate, abhängig von verschiedenen Maschinen nach Erhalt der Bestellung Anzahlung.
Einmal klar Ihre Anforderungen und ermittelt extrusion Linie ist ideal für Sie. Wir werden senden technische Lösungen und
Proforma-Rechnung an Sie. Sie können per TT-Banküberweisung, LC bezahlen, wie Sie möchten.
Eins. Wir bieten sowohl kundenspezifische Extrusionslinien als auch technische Lösungen an. Willkommen Kontakt mit uns für technische
Innovationen oder Verbesserungen für Ihren zukünftigen Einkaufsplan.
Wir produzieren jedes Jahr weltweit mehr als 2000 moderne Extrusionsanlagen.
In dringenden Fällen können wir die kleinen Ersatzteile per Luftexpress versenden. Und die komplette Produktionslinie auf dem Seeweg
um Kosten zu sparen. Sie können entweder Ihren eigenen beauftragten Spediteur oder unseren kooperativen Spediteur nutzen. Der nächstgelegene
Hafen ist China Shanghai, Ningbo Hafen, die für den Seeverkehr bequem ist.
Ja, wir unterstützen unsere Geschäftspartner durch Pre-After-Sale-Service. Jwell hat mehr als 300 technische Tests
Ingenieure, die in der ganzen Welt unterwegs sind. Auf alle Fälle werden wir mit schnellen Lösungen reagieren. Wir bieten Schulungen, Tests,
Betriebs- und Wartungsdienste für ein ganzes Leben.
Bescheinigungen
Zertifiziert durch:SGS
Extrusion nachgelagerte Ausrüstung
2015-07-23 ~ 2020-07-23
Zertifiziert durch:SGS
Extrusion nachgelagerte Ausrüstung
2015-07-23 ~ 2020-07-23
Zertifiziert durch:SGS
Extrusion nachgelagerte Ausrüstung
2015-07-23 ~ 2020-07-23
Zertifiziert durch:SGS
Extrusion nachgelagerte Ausrüstung
2015-07-23 ~ 2020-07-23
Zertifiziert durch:Andere
Design, Entwicklung, Herstellung und Vertrieb von Schutzrechten für Kunststoffmaschinen
2016-06-14 ~ 2019-06-13
Zertifiziert durch:Andere
Entwurf, Entwicklung, Herstellung und Vertrieb von Produktionsanlagen für die Extrusion von Kunststoffrohren und -platten
2018-11-20 ~ 2021-11-19
Zertifiziert durch:Quality Austria Training, Certification and Evaluation Ltd
Kunststoff-Extrusionsanlage
2010-01-29 ~
Geprüfter Hersteller
Geprüft vor Ort durch das weltweit führende Inspektionsunternehmen Bureau Veritas am ALIBABA.com
- Vom Anbieter bewertete Videos
- Panoramabilder
- Factory inspection reports
- Verifiziert Produktion Linien
- Zertifikate:ISO
Ähnliche Produkte
-
Dünnwandige, effiziente Rolle
Komponente -
Sheet Die Serie
Komponente -
T-Matrize Matrizenkopf Form
Komponente -
Walze
Komponente
English 
Russian 
Spanish 
Arabic 
German 
French 
Persian 
Turkish 
Bulgarian 
Czech 
Dutch 
Greek 
Indonesian 
Japanese 
Korean 
Polish 
Portuguese 
Romanian 
Slovenian 
Ukrainian 