CHINAPLAS 2024 came to a successful conclusion, and JW people returned with a full load

The four-day CHINAPLAS 2024 has come to a successful conclusion. During the intense and orderly busy process every day, Jwell had in-depth exchanges with its customer partners. We witnessed countless wonderful moments together and left beautiful marks on each other.

Focusing on the trend of “high-end, intelligent and green development” in the rubber and plastics industry, Jwell debuted with a number of core solutions. Efficient and leading technical advantages and diversified application scenarios accurately responded to customer needs and market changes. The site attracted industry experts and technology innovators from around the world, demonstrating the latest trends and cutting-edge technologies in the industry in the extrusion segment. .

Highlights of the exhibition machine

Pulp molding and trimming machine

Utilizing renewable plant resources such as wheat straw, reeds, sugarcane bagasse and other plant fibers, through molding methods, we produce various fiber daily necessities, fiber paper mold tableware, fiber paper mold trays, fiber paper mold industrial products shock-proof pads and packaging trays, Non-planar fiber paper mold decorative wall panels and non-planar fiber paper mold three-dimensional products.

Features:

●Slurry suction method: reciprocating molding

●Maximum product height: 100mm

●Drying method: drying in the mold

●Molding pressure: 40-60 tons

●Stereotype plate heating: thermal oil or electric heating

●Product transfer method: in-mold transfer

●Output: 800-1000Kg/24 hours

CFRTP-UD unidirectional belt testing machine

This test line is mainly used for the experiment and production of CFRTP-UD unidirectional tapes. CFRTP unidirectional tapes are single-layer fiber-reinforced thermo-plastic composite sheets that are spread out by continuous fibers and impregnated with thermoplastic resin and then shaped. The characteristic is that the fibers are arranged parallel to each other (0° direction) without interweaving.

Technical Parameters:

●Basic resin: PP, PE, PET, PA6, PPS, PEEK, etc.

●Fiber type: glass fiber, carbon fiber, aramid, basalt fiber

●Product thickness: 0.15~0.45mm

●Product width: 50~300mm

●Product area density: 100~650gsm

●Product fiber content: 40%~70%

●Traction speed: 5~20m/min

PE stone paper production line

Stone paper does not require trees & uses plant fiber to make paper, which protects the natural ecology and is an environmentally friendly product. Stone paper made of PE + calcium stone powder is fully mixed, easy to write and print, moisture-proof and moth-proof, resistant to folding and tearing, and can be used in packaging, office paper, printed photo albums, decorative wallpapers and other fields.

Jwell provides a complete set of equipment required for stone paper production, including mixing and granulation, extrusion casting, tensile reinforcement, surface coating, winding and slitting. The production line adopts PLC integrated control, with fast production speed, high efficiency and low cost. The finished stone paper has a smooth surface and good quality.

Storage-winding system production line

This rewinder is suitable for rewinding TPU films and coated products. The system adopts a control method that combines servo control and tension detection to achieve a constant tension rewinding state. The constant tension mode ensures that the film does not break during the rewinding process. Wrinkle, flat and beautiful features. The double-station winding machine realizes the functions of automatic cutting and automatic winding, which can increase the speed of the production line, save time and reduce manual operations.

Features:

●Double-station automatic winding machine

●Structural form: automatic cutting. automatic flipping

●Rewinding reel: three-inch splined air-expanding shaft

●Rewinding reel installation method: using cylinder clamping

●Rewinding drive: driven by servo motor

●Tension sensor: Italian brand

●Rewinding diameter: Φ800mm

●Rewinding width:2000mm

●Rewinding speed: 50m/min

High barrier MDOPE blow molding coating production line

5-layer co-extrusion online MDO + online coating single material high barrier blown film solution

Features:

●The first choice instead of aluminum foil milk packs

●Easy to recycle and biodegradable

●Microwaveable

●OTR<0.1

●Oxygen permeability<0.1

JWZ-BM30Plus three-layer blow molding machine with liquid level

This model is suitable for the production of 20/30-liter fully automatic stacking barrel production lines.

Application features:

●Adopts three-layer continuous machine head with liquid level line, two-plate U-shaped mold frame, and down-blowing structure. It is equipped with an automatic feeding machine, automatic online flash removal, one forced cooling setting, three auxiliary setting, online leak detection of products, reserved online weighing and coding stations, and online conveying and crushing of flash. The intelligent hollow blow molding machine production line with unmanned and less-manned operation will greatly reduce labor intensity and improve production efficiency.

●Adopts B&R automation control system, supports multi-task time-sharing operation, and has a high degree of automation; the advanced human-machine interface replaces the conventional panel function control system, and the new generation of programmable computer controller represents a new level of industrial control, integrating PLC With the functions of industrial computers, operating programs (parameters) can be stored. Centralized display of machine operating status, open structure and fieldbus interface

●The mold base adopts the JW 5th generation two-plate U-shaped structure. The mold closing is driven by the rotation of the servo swing arm. It has small friction control resistance, good movement characteristics and high mold closing accuracy. For stability and cost-effectiveness, the sub-mold clamping is equipped with a power package. . Compared with conventional hydraulic models, electric blow molding machines can significantly increase output, reduce energy consumption, and reduce product pollution. The mold base has the characteristics of uniform mold clamping, large mold clamping force, large modulus capacity, and easier mold disassembly and assembly.
●Using a continuous three-layer die head with liquid level line, while ensuring the stretching and density of the blank, the color change, layering control and product surface treatment are relatively good. The recycled material is extruded into the middle layer of the product, and the inner and outer layers are covered with new material. The appearance of the product is the same as the new material, and the strength and performance of the product are improved.
●This unit moves the semi-finished product containing flash to the flash removal station online, pushes the flash and then flips it to the cooling and shaping station, where it is cooled by high and low pressure circulating air blowing. Continuously use low-temperature dry air circulation cooling to shorten the molding cooling time. Subsequent auxiliary shaping + online leak detection and weighing.
●The whole machine is driven by servo motor, with a total of 5 sets of servo

Although the exhibition has concluded successfully, the excitement will not stop. I would like to sincerely thank every visitor and friend who came to the exhibition, and thank every customer partner for their trust and support. Thanks for meeting us and looking forward to seeing you again!