solar float blow molding machine

Solar Photovoltaic Projects

With the development of science and technology, electricity has become an indispensable component of human life and industrial production, and how to use electricity efficiently, cleanly and economically has become the main research direction nowadays. In addition to the common hydroelectric and thermal power generation, the conversion of solar energy and electrical energy has also been attracting attention from all over the world. In recent years, with the proliferation of photovoltaic power plants on the road, there is a serious shortage of land resources available for installation and construction, which restricts the further development of such power plants. At the same time, another branch of photovoltaic technology – floating power plants into the people’s eyes. According to a research report by Marketsand Markets, the global market size of floating PV power plants is estimated to be $889.6 million by 2017, with huge potential.


solar float blow molding machine 2


Solar PV floating and racking projects

Floating power plants can be built on a variety of bodies of water, whether natural lakes, artificial reservoirs or coal mining sinkholes, sewage treatment plants, as long as there is a certain amount of water for equipment installation. When floating power plants meet the latter, not only can “waste water” be regenerated into a new power plant carrier, but also can maximize the self-cleaning ability of floating photovoltaic, by covering the water surface to reduce evaporation, inhibit the growth of microorganisms in the water and thus achieve the purification of water quality. Floating photovoltaic power plant can make full use of water cooling effect to solve the cooling problem encountered by road photovoltaic power plant, and at the same time, because there is no shade over the water, fully exposed to light, floating power plant is expected to improve the power generation efficiency by about 5%.

Water floating type is the basic form of water PV power plant. There are mature applications in many countries China, Japan, India, Korea, Singapore, UK, Norway, USA, Brazil, Australia, etc.

solar float blow molding machine application scope

The solar power plant is built on the water by using a floating racking platform to support the electric panels and connect all the panels together. These pontoons are hollow structures, made by a blow molding process, and are relatively inexpensive. Think of it as a waterbed net made of strong rigid plastic. Suitable sites for such floating PV plants include natural lakes, man-made reservoirs, as well as abandoned mines and pits.
solar float blow molding machine

Floating photovoltaic power plant on water

Floating photovoltaic power plant is built on 6,000 acres of water in the Panji coal mining subsidence area in Huainan City. The upper water surface of the former coal mining sinkhole is used for power generation and the lower layer is used for aquaculture, which not only greatly improves the economic output per unit area, but also purifies and treats the water bodies in the sinkhole, giving a perfect combination of nature and technology.

The worlds largest floating photovoltaic power plant on water

Control System

B&R Austrian original man-machine operator interface and blast control system, 300 points adjustable blast wall thickness control.

Main Configuration

Extrusion and head system

Extrusion system screw and barrel adopt Jinhailuo, which has the advantages of high output, good plasticization, high hardness and high abrasion resistance, etc.; it is equipped with special hard gearbox for plastic extrusion.
Control System

Jwell provides customers with a variety of stable single/multi-layer continuous and storage type heads to meet the special requirements of customers for different polymer materials and different degrees.


  • Take out product function
  • Top wrapping and sealing function

solar float blow molding machine robots

Automatic lubrication system

The lubrication system can automatically lubricate the system, and the lubrication time period can be set by yourself
Automatic lubrication system

Mold opening and closing system

Three plates and three tie rods structure-boosting oil cylinder
Mold opening and closing system

INOVANCE inverter speed control


Schineider electrical components

Schineider electrical components 2

Schineider electrical components

Hydraulic system

Hydraulic control system adopts servo motor – oil pump control technology, servo control system, SUMITOMO low noise gear pump, fast response, low energy consumption, less heat generation, 50% energy saving than conventional motor.

Hydraulic system 2


  • International Commercial Terms(Incoterms): FOB, CFR, CIF, EXW
  • Terms of Payment: LC, T/T
  • Average Lead Time: Peak season lead time: 3-6 months, Off season lead time: 1-3 months
  • Number of Foreign Trading Staff:>50 People

Yes, We own 5 manufacturing bases and sales center in Shanghai , Suzhou ,Changzhou, Zhou Shan, Dongguan China.
Jwell made the first Chinese screw and barrel in 1978 in brand name Jinhailuo.After more than 40 years development,
JWELL is one of the biggest extrusion machine supplier in China with 300design&test engineer, 3000 employees.
Jwell has become the premier supplier of extrusion lines and reliable business partners. Welcome to drop in us.

Our machines taking the European standards and follow the Germany type of business, we cooperation with
International famous brands Siemens Schneider Flender Omron ABB WEG Falk Fuji etc. Our company continuously
imports over 1000 international first-class high precision processing equipment such as multistage machining centers, CNC lathes and CNC milling machines from Korea, Japan etc. All our processes strictly adhere to CE certification,
IS09001 and 2008 quality management system . And we have 12 months quality warranty time. We testing the
machine performances before each delivery. Jwell service engineers will always be here for anything you needed.

Usually it takes about 1 – 4 months depends on different machinery upon receipt of order advance payment.

Once clear your requirements and determined extrusion line is ideal for you. We will send technical solutions and
Proforma Invoice to you. You can pay via TT bank transfer, LC as you like.

One. We provide both customized extrusion lines and technical solutions. Welcome contact with us for technical
innovation or improvements for your future purchasing plan.

We produce more than 2000 advanced extrusion lines every year world wide.

We can send the small spare parts by air express for urgent matter. And the complete production line by sea
to save the cost. You can either use your own assigned shipping agent or our cooperative forwarder. The nearest
port is China Shanghai, Ningbo port, which is convenient for maritime transportation..

Yes, we support our business partners by pre-after sale service. Jwell has more than 300 technical testing
engineers traveling world wide. Any cases would be responded with prompt solutions. We provide training, testing,
operation and maintenance service for a life time.


Contact Form

What is 2+2?


Verified Manufacturer

Verified onsite by world-leading inspection company Bureau Veritas on

Scroll to Top

request a quote

What is 2+2?